How do screw pump manufacturers maintain electric oil well pumps

In order to speed up the production rhythm, some enterprises now make many mechanical equipment run continuously for 24 hours, which greatly reduces the service life of the mechanical equipment. The electric pump should be operated in a qualified and standardized manner and maintained in time to improve the service life, so how does the screw pump manufacturer maintain it?

1. The electric oil pump should often add fat. The electric oil drum pump runs at high speed, and the grease is volatile, so it is necessary to keep the bearing moist and clean, and pay attention to replacement.

2. Pay attention to the insulation resistance of the electric oil pump. For electric oil well pumps that are put on hold for a long time or used in wet environments, the insulation resistance of the windings must be measured with a 500-volt megohmmeter. If the insulation resistance between the winding and the motor case is less than 7 megohms, the winding must be dry.

3. The electric oil pump should be checked and maintained frequently.

4. Save each part and replace the same part. After dismantling and checking the electric oil well pump, if it is damaged, it should be updated in time. Subsequent material performance materials or parts that do not meet original specifications must not be used. During installation, all parts should be installed in their original positions and must not be omitted.

5. For screw pump manufacturers, note that the storage electric pump should be placed in a dry, clean, airless environment.